Switch Lite is booting - LCD changed no picture although touchscreen works

[Severence]

Torn ribbon cable between mobo and right trigger assembly replacement needed

For demonstration purposes I’ve performed a similar task on the ribbon cable for a cracked nintendo switch LCD but it’s the same principle. Unfortunately, i don’t have a camera for my optical microscope, so you’ll have to settle for these poor quality phone shots, as i say though, this is for demonstration purposes only and was the culmination of about two minutes of work after purposely severing the cable, I would in no way consider the joints here as acceptable…for example i didn’t even bother…

Though I would carefully inspect the connector also for charring, as they do typically need to be replaced in those events.