Hello, i have a switch thats not powering on. it had a faulty lcd connector which i changed. there’s no shorted caps around M92T36, P13USB, BQ24193. the usb-c port looks good, no pins shorting to ground. have no problem charging battery. M92T36 pin 6 has 0.68v even with power adapter connect and p…

That’s good, that tells us with almost 100% certainty it’s the ENXX IC at fault, Typically the IC is quite robust and doesn’t fail unless the cause was (often) extreme liquid/corrosion damage, you might want to inspect the balls below, as in most of the failures I’ve seen it’s been as a result of p…

M92T36 pin 6 missing voltage

Nintendo Questions Nintendo Switch

Severence June 3, 2021, 3:00pm 2

Hey,

Can you measure the points I’ve highlighted in the following topic reply