PS5 Low Voltage on one of the VRAM rails

Hello everyone,

I have a PS5 EDM-010 board which refuses to boot with a 80800022 error code. The APU does get properly initialized though, and no physical damage is present. However, one of the two voltage rails is supplying too low of a voltage, at only 0.8v instead of 1.35v as it should be.
See the below picture:

I cannot put a link or image, please put imgur and a /a/ in front of the below:
IO5XITG

I have no clue how to proceed with this. As far as I can tell there’s no shorted caps? (diode mode check both sides of the cap)